Shelf FInished, Bubbles Removed from Circulator

I got the shelf installed and started fixing the leaks and bubbles in the circulator setup.  The pictures below are from my phone and I will get better quality ones next week:

I still need to fix one leak and tighten down the barbed nozzles on the circulator.  I left the setup next to the sink for the weekend.

I need the extension cord to for the water pump’s power supply and you can also see the end of the coax, the leads for the magnetron and the fan.  The fan, used to cool the magnetron, will setup air currents inside the Faraday cage, but I will create a cowling if anything does move.

Have a good weekend!